May 22, 2018
  • 9:48 pm WD10000C033 000 DRIVER FOR MAC
  • 9:43 pm CANON 4025I DRIVERS FOR WINDOWS
  • 9:38 pm DELL ULTRASHARP 1702FP DRIVER FOR MAC DOWNLOAD
  • 9:33 pm ASUS VK222 DRIVER FOR MAC DOWNLOAD
  • 9:28 pm INTERMEC EASYCODER E4 DRIVER FOR WINDOWS

Skip to main content. This tool is available through many electronic supply outlets. Page 42 Heat sink assembly Intel — Model B Prepare the computer for disassembly Preparation for Disassembly on page Remove the access panel Access Panel on page Lay the computer on its side with the rear facing toward you. Remove the front bezel Front Bezel on page Unplug the four cables that connect the assembly to the system board. Discard Changes Press Enter to discard changes.

Uploader: Zuzragore
Date Added: 8 August 2006
File Size: 5.91 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 25878
Price: Free* [*Free Regsitration Required]

You’ll receive email and Feed alerts when new items arrive. Remove the four torx screws 1 that secure the heat sink to the system board. Page 66 Table A-7 Computer Setup—Advanced continued Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the system: Figure Locating the hard drive Disconnect the power 1 and data 2 cables by squeezing the latch on the connector and pulling to remove.

Check that no debris or corrosion is in the socket. Page 23 Remove the graphics card from the card slot. Replace the access compaq 505b mt, external equipment, and compaq 505b mt the power cord.

Compaq 505B Microtower PC Software and Drivers

Always unplug the computer when cleaning with liquids or damp cloths. Make sure that the memory card is fully inserted into the slot.

If using a new heat sink, remove the protective covering from the bottom of the heat sink and place it in position atop the processor. Page 44 Processor Intel — Compaq 505b mt B Prepare my computer for disassembly Preparation for Disassembly on page Remove the access panel Access Panel on page Lay the computer on its side with the rear facing toward you. We have been shipping memory RAM since Noting the location, type and orientation of compaq 505b mt power connectors is extremely important.

Without a doubt, cmopaq is the most important factor in buying a memory upgrade for your laptop or computer. Memory or DRAM is the mmt compaq 505b mt of the computer.

Provide a wrist strap connected to the work surface and properly grounded tools and equipment.

Removal and Replacement Procedures Microtower MT Chassis Adherence to the procedures and precautions described in this chapter is essential for proper service. Figure Removing the system board — model B shown To install the system board, reverse the removal procedure. Our expert after sales team provides you with support for installation and troubleshooting anytime you require it. Page 25 To compaq 505b mt a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis so that the bottom of the bracket on the card slides into the small slot on the chassis.

The disc is damaged or corrupted. Compaq 505b mt 45 Apply the thermal grease provided in the spares kit to the top of compaq 505b mt processor and install the heat sink atop the processor. They may have standard or metric threads and may be of different lengths. Page 38 Attach the two screws to secure the hard disk drive to the bay.

hp compaq b | eBay

Our new ccompaq experience requires JavaScript to be enabled. Operating Compaq 505b mt To prevent overheating and to help prolong the life of the computer: Never immerse any parts in water or cleaning solutions; apply any liquids to a clean cloth and then use the cloth on the component.

By pressing ‘print’ button you will print only current page. Installing Additional Drives When installing additional drives, follow these guidelines: If you are removing a PCI Express x16 card, pull the retention m on the back of the expansion socket away from the card and carefully rock the card back and compaq 505b mt until the connectors pull free compaq 505b mt the socket. Chipset is a set of integrated circuits that have a specific purpose in a computer system, a group of microchips used together to perform a single task.

It can also perform hardware diagnostic testing on the computer and compaq 505b mt subsystems, which provides information for troubleshooting. Grounding the Work Area To prevent static damage at the work area, use the following precautions: Microtower MT Chassis Designations Prepare the computer for disassembly Preparation for Disassembly on page Remove the access panel Access Panel on page Remove the compaq 505b mt bezel Front Bezel on page Drives, Installing Additional Drives Drives The computer supports one optical drive and one hard drive.

Slide the system board toward the front of the chassis, and then lift it up and out of the chassis. For more recent exchange rates, please use compaq 505b mt Universal Currency Converter.

Compaq B Microtower PC Software and Drivers | HP® Customer Support

For all other SKUs, instead of F10 in the above handling. Regardless of the power-on state, voltage is always supplied to the memory modules 505g long as the computer is plugged into an active AC outlet. Figure Replacing the bracket screw Compaq 505b mt external cables to the installed card, if needed.

Asia Pacific and Oceania. Figure Removing the bracket cover If you are removing a graphics card, press on the latch to release it. Choose a different product series.

Insert the new battery and position the clip back in place. System Board Figure Power supply securing features System Board When replacing the system board, be sure that compaq 505b mt following components are removed from the defective system board and installed on the replacement system board: